Comunque ecco a voi un pratico riassunto:
Formati supportati [modifica]

SUPER può eseguire e convertire molti formati di file audio e video:

Video [modifica]

* 3GP
* ASF
* AVI
* DAT
* FLIC animazione (FLI e FLC)
* Flash Video (FLV)
* MPEG (sia MPEG-1 che MPEG-2)
* Matroska
* MPEG-4 Parte 14 contenitore (MP4)
* OGG Theora/Vorbis
* Quicktime movie (MOV e QT)
* RealVideo (RAM e RM)
* str
* Shockwave Flash (SWF)
* MPEG flusso di trasporto (TS e M2T)
* trp
* VIV (solamente in entrata)
* DVD video files (VOB)
* Windows Media Video (WMV)

Audio [modifica]

* aac
* AC3
* AMR
* SMAF cell phone audio (MMF)
* MP2
* MP3
* Musepack audio (MPC)
* OGG Vorbis
* RealAudio (RA)
* WAV

Altro [modifica]

* AviSynth)
* GIF

Profili preimpostati disponibili in un'uscita [modifica]

* 3gp (Nokia/NEC/Siemens)
* 3gp (Sony Ericsson)
* 3g2 (Sony Ericsson)
* aac (solo Audio)
* ac3 (solo Audio)
* amr (solo Audio - Nokia...)
* asf
* avi
* avi (per palmari)
* gif (per creare avatar)
* mmf (Solo SMAF Audio)
* mov
* mp2 (Solo Audio)
* mp3 (Solo Audio)
* mp4
* mpc (Audio Only)
* mpg (Mpeg I)
* mpg (Mpeg II)
* mpg (.DAT to .MPG) VCD
* mpg VCD Compliant
* mpg SVCD Compliant
* ogg
* swf or flv (Flash)
* vob DVD Compliant
* vob (.TS / .M2T to .VOB)
* wav (Solo Audio)
* wma (Solo Audio)
* wmv

* AutoMode
* Apple - iPod
* Apple - iPod 5.5G
* Microsoft - Zune
* Nintendo - DS
* Sony - PS3
* Sony - PSP

OK, onto the point:  I have successfully produced a very short video clip from a 720x480 (or was it HD SP?) mpeg2 video file into a final output of a 720x480 mpeg2!  This may sound like "So what?", so let me explain:

Using Rob Scott's BunnyHopHop workflow I have used Blender 2.47 to do a minor edit to a 720x480 (or was it HD SP?) mpeg2 file with proxies, exported an excerpt of the video to PNG, optimized an AVS script in AvsP, (find the AviSynth wiki here,) ran it in QuEnc to encode the video to mpeg2, and the final result was a compressed 720x480 video with a/v in sync!

See a screenshot:

Praise the Lord!  This is a  big mile marker in my video editing journey!

Now I hope all my editing needs will be met by open source software and Blender, and that BlenderAVC will rise to meet the standards of editing HD in the open source world!

About BlenderAVC:

BlenderAVC is an open-source project to provide the "glue" between Blender's Sequence Editor and video in the AVCHD format. It provides a way of automating the creation of AviSynth scripts and proxy files so that AVCHD and HDV video can be efficiently edited within Blender.

[from the Open Filmmaking page on BlenderAVC.]

God bless!  I look forward to the journey ahead,

Thanks a million, Rob Scott!!!

-b

P.S. The video I tested was from a number of .tod video files through CyberLink BD: PowerDirector Express and exported to mpeg2.  In future testing I may use other workflows to optimize the time spent/quality.

Windows Media Encoder going forward will be referred to as WME.

Preparation
Windows Media Encoder
Windows Media Player 11 (if you haven't already upgraded)

If you don't want to install Windows Media Player 11, you'll still need the upgraded codecs that come bundled with it. You can download a standalone distribution here.
Windows Media 11 Format Runtime

WMCmd.vbs is a very small file that is included in the WME download and in fact the command-line version of WME. Officially, WME does not accept AviSynth scripts as input. However, a very generous Microsoft employee has (legally) taken it upon himself to "hack" this file to do so. Grab the file here. After you've done that, go to the install path of WME and find WMCmd.vbs that's already there. Rename it anyway that you want - just don't delete it. Then replace it with the hacked file.

Yay. We're on our way.

Procedure
We're going to create a batch file...well...because it's easier than typing all of the command-line arguments directly into a non-point 'n' click world. It allows for easier entry and editing of said arguments. Start by opening up Notepad or your favorite plain text editor. Then copy and paste the following:

"C:\WINDOWS\system32\CScript.exe" "C:\...\WMCmd.vbs" -input "C:\...\my-script.avs" -output "C:\...\my-video.wmv" -v_codec wmv9 -v_mode 0 -v_buffer 5000 -v_bitrate 500000 -v_keydist 30 -v_quality 10 -v_performance 20 -pixelformat yv12 -v_profile sp -a_codec wmastd -a_setting 96_44_2 -a_mode 0

A few things to consider about all of that:

1. The path to WMCmd.vbs is relative because you could've installed WME wherever you wanted to so you'll have to fill that in. The same goes for the path to your script and your output file.
2. -v_bitrate is video bit rate in bits/second. Don't be too liberal here. I would stay in the range of 300 kbps to 700 kbps.
3. -a_setting is audio parameters - example 96_44_2 is 96 kbps, 44.1 kHz, 2-channel stereo. All of these can vary if you wish but again I wouldn't stray too far off.

Save the text file and give it a bat file extension, foregoing the usual txt extension.

Got it? Good. We move on.

Before we dive in to command-line stuff, let's make it easy to start up a command-line window for WME quickly and efficiently. Open up the folder where WME was installed and then open up a second window and navigate to the C:\Windows\system32 folder. In that second folder hit the letter 'C' on your keyboard and scroll down until you find cmd.exe. Right-click on it and select Copy. Then switch to the first window, right-click on an empty space and select Paste. Close the second window. In the first window, right-click and drag cmd.exe to your Desktop. On the context menu that appears, select Create Shortcuts Here. Double-click your new shiny shortcut.

My God we're good. :-)

To call up our batch file for WME all that we have to do is type in the full path location and file name of the batch file itself.

Click Enter and watch video conversion magic happen right before your eyes. When the encoding is finished you will have a WMV file that will seamlessly and quickly sync to your Zen.

Preparation
You will need to download and install some free and legal software for this guide.

DVDFab HD Decrypter
DGMPGDec
AviSynth
VirtualDub
NicAudio (plug-in for AviSynth)
TDeint (plug-in for AviSynth)
MeGUI

Rip DVD
Launch DVDFab HD Decrypter and then insert the DVD into your DVD-ROM drive.

1. Switch to Main Movie mode. We don't need to unnecessarily rip special features and other extra content.
2. Choose a destination folder for the ripped files.
3. Select the main movie title VOB from the list (Hint: look at the Play Time column to determine this).
4. Select the audio track that you would like to include.
5. Click the Start button to begin the rip.

Index MPEG-2 Stream
Next we'll need to index our MPEG-2 stream so that AviSynth can properly send it through to the XviD encoder. We want to open the folder that contains our newly-ripped DVD files and launch DGIndex also, found in the install path of DGMPGDec.

Sort the files so that the VOB files are grouped together and sequential. You can ignore the IFO and BUP files. Also, pay no attention to the fact that I switched movies amongst my screenshots. ;-) They serve merely illustrative purposes, but the idea remains.

With your mouse and CTRL key, select all of the VOB files and drag them to DGIndex.

Pull-down the Audio menu and select Output Method - Demux All Tracks

Now pull down the Video menu and select Field Operation - Forced Film

Note: This step assumes that the content on your DVD is film-based (23.976 FPS). Leave comments for this post and let me know if you need to know what to do in other cases.

With all of that done, all that's left is to pull down the File menu and select Save Project. Select a destination folder and let it go. DGIndex will scan the entire length of the movie quicker than real time; it should only take a few minutes. When it's finished, you will have a D2V file and an AC-3 file.

AviSynth Script
Open up notepad, or your favorite plain text editor, and copy the following lines into it:

loadplugin("...\Program Files\AviSynth\plugins\...\dgdecode.dll")
loadplugin("...\Program Files\AviSynth\plugins\...\nicaudio.dll")
loadplugin("...\Program Files\AviSynth\plugins\...\tdeint.dll")
v=mpeg2source("...\movie.d2v").lanczosresize(320,240).tdeint()
a=nicmpg123source("...\movie.ac3").ssrc(44100)
clip=audiodub(v,a)
return clip

Of course, it's up to you to complete the file paths and names in each line. The text above would never work as is - remember- illustrative purposes only. Once that is done, save it with a *.avs extension and open it in VirtualDub. You should be able to scrub through the film.

Encoding with MeGUI
Since the AviSynth script works in VirtualDub, it will work in MeGUI.

1. Click the Open button and select your script.
2. Click the Open button and choose your destination and filename.
3. Pull down the Codec menu, choose XviD, and then pull down the File Format menu and choose AVI.
4. Pull down the Video Profile menu and choose "XviD '>90% comp. check'(HQ)".
5. Click on the Config button.

1. Pull down the Mode menu and choose CBR - constant bit rate.
2. In the bit rate field, type 500.
3. Pull down the Motion Search Precision menu and choose 6 - Ultra High.
4. Pull down the VHQ Mode menu and choose 4 - Wide Search and then click OK.

Now we move on to Audio.

1. Click the Open button and choose your script again.
2. Choose your destination and filename.
3. Pull down the Codec menu and choose LAME MP3.
4. Pull down the Audio Profile menu.
5. Click on the Config button.

I recommend switching Encoding Mode to CBR, ensuring that the Bitrate is at 128, and then making these settings a New profile by clicking on New and giving it a name. Click OK when you're done here.

Back at the main window, click on both Enqueue buttons. This will add both Video and Audio conversion processes to the Queue tab. Be patient after clicking Enqueue for Video encoding. It seems to run a quick 3-5 second "invisible" analysis.

Here, all that needs to be done is click Start. Depending on your processor speed/type/quality etc. you may now have some real time on your hands. Chill. It's Miller Time! When MeGUI is finished you will have an AVI file with no sound and an MP3 file.

The two files need to be "merged" together, or "muxed", into one AVI file. Pull down the Tools menu and select Muxer - AVI Muxer.

1. Click on the Open button and select your newly-encoded AVI file.
2. Click on the Open button and select your newly-encoded MP3 file.
3. You can either keep the appended filename and location or click the Open button and change it.
4. When you're done click the Queue button.

Back on the Queue tab, you will now see the Mux process waiting to be...well processed. Click the Start button to begin muxing. This is a very quick process. When muxing finishes you are done! All that's left to do is sync that bad boy to your Zen and enjoy!

As they stopped allowing free uploads as of 18th December, reckon I'm gonna have to try my luck with Blip anyway so might as well carry on using this site.

Blip seems to be where it's at in terms of independent video (the big boys are all using Brightcove*). From my very basic level of understanding, the distribution and marketing opportunities it offers are very enticing.

However, what I really miss in Brightcove's PublishPod. It was perfect for novices like me who don't want to deal with compressing their own video and grabbing their own thumbnails etc.

Hey ho, onwards and upwards. I've downloaded DivX Codec, VirtualDub and AviSynth. Which sounds great but it's doing my head in going from forum to forum so I can figure out how to use them. Doh!

* although Queenie has chosen YouTube. She's sooo down with the kidz! She's officially the first monarch to join the online video revolution!

http://www.erightsoft.com/SUPER.html

It is hard to find a program to convert your video files.
Many programs don't have the options, and many have licenses and aren't free.

There is almost always a free program out there - open source or otherwise - that will solve all your problems for you. If only you knew about it.

I want to hand in my endorsement of the day - Super (C)

This program is so powerful, it can convert just about any video file to just about any video file.
from the site: aac, ac3, amr_nb (for ring tones), amr_wb, mmf (for ring tones), mp2, mp3, mpc (MusePack), ogg, wav, wma

I use it almost every day. There are so many options and the quality is great. The speed is relatively fast too. There is nothing substandard about this converter at all. In fact, this is the best encoder I have ever used, paid for or not.

Check it out and if you have something better, let me know. Have fun